Halco 108308 MV100DXMOG 100W MV ED23.5 MOG PROLUME

Halco 108308 MV100DXMOG 100W MV ED23.5 MOG PROLUME

Notes:
• It is a characteristic of phosphor-coated vapor lamps to require a few hundred hours of operation to gradually reach normal characteristic color. New lamps may have a slight pink appearance during this initial operation period.
• In general, horizontal lumens will be 5-10% lower than the vertical lumen values.

Warnings:
• Turn power off before inspection, installation, or removal
• Use in fixture designed for use with Mercury Vapor Lamps
• Fixture wattage rating must match the wattage indicated on the outer glass bulb
• Keep combustible materials away from lamp
• Turn power off immediately if glass bulb is broken. Remove and dispose of lamp after it has cooled
• A partial vacuum in the outer bulb may cause glass to fly if the glass is struck
• Do not exceed rated voltage
• Do not use where lamp is directly exposed to water or outdoors without an enclosed fixture
• Do not use lamp if outer glass is scratched or broken
• Use only properly rated ballast